Setting The Internet Fax Reception - Kyocera KM-4230 User Manual

Using the Scan Functions

8.12.2 Setting the Internet FAX Reception

To receive e-mail using Internet fax, use Printer Management Utility or this
machine's control panel to set the mail server (POP3 server).
Using Printer Management Utility
1
Start up Printer Management Utility.
2
Enter the administrator access code, and log in to Administrator mode.
3
On the "Network" tab, click
Receive
4
Specify settings for the following.
POP3 Server
POP3 Login Name
POP3 Password
Mail Check
Port Number
POP3 Connection
Timeout
E-mail / Internet
in the sub-menu that appeared.
Set the IP address of the POP3 server.
Set the login name of the POP3 server (up to 63 characters).
Set the password for logging in to the POP3 server (up to 15
characters).
Set whether to periodically check the mail server contents.
If "No" is selected, e-mails will not be received.
If "Yes" is selected, set the interval for checking the mail server (in
minutes).
Set the port number of the POP3 server.
(Normally, use the default value of 110.)
Set the connection timeout for the POP3 server.
FAX, and then click
8
8-73