Table of Contents
Advertisement
Push the center as shown in the figure to make space for
4
the developer unit.
5
Put the developer unit into that space.
To reinstall the developer unit into the printer, use the reverse procedure of the above.
®
E
S
NERGY
TAR
The action program Energy 2000
26
As an E
S
Partner, we have determined that this product meets the
NERGY
TAR
E
S
guidelines for energy efficiency.
NERGY
TAR
The basic objective of the E
lution by encouraging the manufacture and sale of equipment that uses energy
more efficiently.
This printer is equipped with a sleep timer function that conforms with the stan-
dards of the E
S
NERGY
TAR
the amount of electrical power consumed by the printer. For maximum power
savings, turn off the printer's power supply when not using the printer for
extended periods of time.
For details on the sleep timer function and printer power consumption, refer to
the CD-ROM instruction manual provided with the printer.
Initial settings of the sleep timer function and power saved using the sleep timer
function:
Initial sleep mode setting
FS-1800
15 minutes (15 minutes)
FS-1800N
FS-3800
15 minutes (30 minutes)
FS-3800N
Energy partnership for a sustainable development. We get further – with all our
energy.
FS-1800/FS-3800
FS-1800N
FS-3800N
S
Program is to reduce environmental pol-
NERGY
TAR
Program. This function makes it possible to reduce
( ): E
NERGY
Power consumption in standby (sleep) mode
14 W (16 W)
15 W (16 W)
16 W (16 W)
Developer Unit
Power consumption in
sleep mode
14 W (20 W)
15 W (20 W)
14 W (30 W)
16 W (30 W)
S
program guideline
TAR
( ): E
2000 criteria
NERGY
Advertisement
Table of Contents
