Table of Contents
Advertisement
Printer Environment
1.5.8
Serial Interface Parameters
This setting is only available if you have the optional Serial Interface Kit
(IB-10E) installed on your printer. You can change the baud rate, data bits,
stop bit, parity, and flow control for the serial interface. If these settings
are changed, you must also change the serial interface parameters on your
computer.
1
Click the MENU button on the start-up screen.
2
The Menu dialog box appears. Double click Interface settings and
Serial in that order. The serial interface items are displayed on the
screen.
3
Click the item you want to change, then select the value you want to
set from the pull-down menu.
1-32
Interface settings
Serial
Serial interface items
Baud rate
Advertisement
Table of Contents
