Table of Contents
Advertisement
3. If any of these components are missing, click on Add Software, select
TCP/IP Protocol and related components and click on Continue.
4. Select TCP/IP Network Printing Support and Simple TCP/IP Ser-
vices and click Continue.
5. After all necessary files are copied, click on OK to close the Network
Settings dialog and restart the system when prompted. The new pro-
tocol and/or services will not be available until the system is
restarted.
Windows NT 4.0
1. Click on the Windows Start button; select Settings and Control
Panel.
2. Double click on Network and select the Protocols tab. If TCP/IP Pro-
tocol is not in the list of Network Protocols, click on Add to install it.
3. Select the Services tab. If either Microsoft TCP/IP Printing or Simple
TCP/IP Services is not on the list of Network Services, click on Add to
install them.
4. Click on Close when all protocols and services have been added. If
the TCP/IP protocol has just been added, Windows will prompt for
the IP address and other TCP/IP parameters. The new protocols and
services will not be available until the system is restarted.
NIC TCP/IP Configuration
A utility called BOOTPL32 is used to configure the IP parameters on the
NIC. Note that the BOOTPLite utilities (e.g., BOOTPL32) will not work on
a system configured as a DHCP server.
1. Insert the disk included.
2. In the Windows NT 3.51 Program Manager, select File and choose
Run.
In Windows NT 4.0 or Windows 95/98, click on the Windows Start
button and select Run.
3. Type <Drive>:\BOOTPL\BOOTPL32.EXE and click OK to launch the
utility.
4. Select Configure from the Admin menu.
• Enter the IP parameters.
15
Advertisement
Table of Contents
