Making Settings From The Touch Panel - Kyocera KM-6030 Operation Manual

Set-up

Making settings from the touch panel

This section explains the settings for using the scanner. The setting items are shown below.
•
•
•
•
If you use the software that is included with this product, it is possible to perform the following
settings from an Internet Web browser, or the Address Editor software, from a computer that is
connected to the same network as the scanner. Refer to the Functions Edition of the Operation
Guide (On-Line Manual) for more detailed information.
Notes
•
•
Basic scanner settings
1 Press the [System menu/Counter] key.
2
Press [Scanner Default].
3 Use the numeric keys on the keypad to
enter the administrator password
number. The factory default setting for
60 ppm machines is 6000 and for 80
ppm machines is 8000.
6
Basic scanner settings...Page 6
Registering and editing user information...Page 7
Editing the shared Address Book...Page 8
Date/Time and Time Difference...Page 12
The network addresses that should be registered here will differ depending upon your network
environment. Check with your network administrator BEFORE performing this setting.
If you are using a DHCP/BOOTP server to automatically configure the network addresses, you
will not need to change the IP address and the Subnet Mask because DHCP/BOOTP server
configuration is already enabled (ON) as the factory default setting.
System Menu / Counter
System Menu
Copy
Default
Scanner Printer
Default Default
Machine Document
Default Management
Enter the administrator number.
Language Management
BOX
MP tray
Management
Register Print
Orig. Size Report
W