Parameters For Monopitcher + Flan - Kurzweil K2600 Musician’s Reference

Page 2
Pt Inp Bal -100 to 100%
Pt Pitch C-1 to G 9
Pt PkSplit 0 to 100%
Page 3
ChPtchEnvL Triangle or Trapzoid
Ch Rate L 0.01 to 10.00 Hz
Ch Depth L 0.0 to 100.0 ct
Ch Delay L 0.0 to 720.0 ms
Ch Fdbk L -100 to 100%
Ch Xcouple 0 to 100%

Parameters for MonoPitcher + Flan

Page 1
Wet/Dry 100 to 100%wet
Mix Pitchr -100 to 100%
Mix Flange -100 to 100%
Pt/Dry->Fl 0 to 100%
Page 2
Pt Inp Bal -100 to 100%
Pt Pitch C-1 to G 9
Pt PkSplit 0 to 100%
Page 3
Fl LFO cfg Dual1Tap
Fl Rate 1 0 to 32 bts
Fl Xcurs 1 0.0 to 230.0 bts
Fl Delay 1 0.0 to 230.0 ms
Fl Phase 1 0.0 to 360.0 deg
Fl Fdbk -100 to 100%
Wet/Dry
Out Gain
Mix Pitchr
Pt Out Pan
Pt Offset
Pt PkShape
ChPtchEnvL
Ch Rate R
Ch Depth R
Ch Delay R
Ch Fdbk R
Ch HF Damp
Out Gain
Fl Tempo
Pt Out Pan
Pt Offset
Pt PkShape
Fl LRPhase
Fl Rate 2
Fl Xcurs 2
Fl Delay 2
Fl Phase 2
Fl HF Damp
This is a simple mix of the pitched and chorused or ßanged signal relative
to the dry input signal.
The overall gain or amplitude at the output of the effect.
The amount of the pitcher signal to be sent directly to the output as a
percent. Any signal that this parameter sends to the output does not get
sent to the chorus or ßanger.
KDFX Reference
KDFX Algorithm Specifications
-100 to 100%
-12.0 to 12.0 ST
-1.0 to 1.0
Triangle or Trapzoid
0.01 to 10.00 Hz
0.0 to 100.0 ct
0.0 to 720.0 ms
-100 to 100%
16 to 25088 Hz
Off, -79.0 to 24.0 dB
System, 1 to 255 BPM
-100 to 100%
-12.0 to 12.0 ST
-1.0 to 1.0
0.0 to 360.0 deg
0 to 32 bts
0.0 to 230.0 bts
0.0 to 230.0 ms
0.0 to 360.0 deg
16 to 25088 Hz
10-87