Parameters For Flanger 1; Parameters For Flanger 2 - Kurzweil K2600 Musician’s Reference

be added to the input of the ßanger signal (Flanger 2 only). White noise has a lot of high frequency content
and may sound too bright. The noise may be tamed with a Þrst order lowpass Þlter.

Parameters for Flanger 1

Page 1
Wet/Dry -100 to 100% wet
Fdbk Level -100 to 100%
Xcouple 0 to 100%
HF Damping 16 to 25088 Hz
Page 2
StatDlyLvl -100 to 100%
LFO1 Level -100 to 100%
LFO2 Level -100 to 100%
Page 3
StatDlyCrs 0.0 to 228.0 ms
StatDlyFin -127 to 127 samp
Xcurs1 Crs 0.0 to 228.0 ms
Xcurs1 Fin -127 to 127 samp
Xcurs2 Crs 0.0 to 228.0 ms
Xcurs2 Fin -127 to 127 samp

Parameters for Flanger 2

Page 1
Wet/Dry -100 to 100%wet
LFO Fdbk -100 to 100%
Xcouple 0 to 100%
HF Damping 16 Hz to 25088 Hz
Page 2
Noise Gain Off, -79.0 to -30.0 dB
StatDlyLvl -100 to 100 %
LFO1 Level -100 to 100 %
LFO2 Level -100 to 100 %
LFO3 Level -100 to 100 %
LFO4 Level -100 to 100 %
Out Gain Off, -79.0 to 24.0 dB
LFO Tempo System, 1 to 255 BPM
LFO Period 1/24 to 32 bts
L/R Phase 0.0 to 360.0 deg
LFO1 Phase 0.0 to 360.0 deg
LFO2 Phase 0.0 to 360.0 deg
Dly1 Crs 0.0 to 228.0 ms
Dly1 Fin -127 to 127 samp
Dly2 Crs 0.0 to 228.0 ms
Dly2 Fin -127 to 127 samp
Out Gain Off, -79.0 to 24.0 dB
Stat Fdbk -100 to 100%
LFO Tempo System, 1 to 255 BPM
LFO Period 1/24 to 32 bts
Noise LP 16 to 25088 Hz
L/R Phase 0.0 to 360.0 deg
LFO1 Phase 0.0 to 360.0 deg
LFO2 Phase 0.0 to 360.0 deg
LFO3 Phase 0.0 to 360.0 deg
LFO4 Phase 0.0 to 360.0 deg
KDFX Reference
KDFX Algorithm Specifications
10-55