Cancelling A Sysex Dump; Loading Factory Setups - Kurzweil ExpressionMate User Manual

Global Functions
Saving and Reloading Setups
The number range, ÒXX-YYÓ speciÞes which Setups have been
selected to save. The left and right buttons move the cursor to any
of these 3 Þelds and the Þeld's value may be changed with the
spinknob and inc/dec buttons in the usual way.
To save just a single Setup, set both XX and YY to that number. To
not save any Setups at all (for example to save just the globals),
make the range backward, i.e., Ò20-10Ó.
When the cursor runs off the screen to the right or the Store
button is pressed, system-exclusive messages are sent out the
Main MIDI port and a progress screen is displayed. The data is
broken up into messages of 32 memory bytes each sent at about
half MIDI speed so as to not overload sequencers, mergers, etc.,
that may be in the system. Speed is about 1 Setup per second.
When the save is completed, you are returned to Play mode.

Cancelling a SysEx Dump

If you need to cancel the dump for some reason, press Exit.
Dumping will stop after the current Setup is dumped, and you
will return to the SysEx Select Setups screen.

Loading Factory Setups

You may selectively reload Factory Setups from the
ExpressionMateÕs ROM. To start, press the Global button when in
Play mode to see this screen:
-GLOBAL SELECT-
EDIT
Then press Utility, followed by Select to scroll through the list of
the ExpressionMateÕs Global Utilities. When Load Setups is
displayed on the top line, press Execute.
A screen such as the following will be displayed:
-RELOAD SELECT-
*Globl,|SU||1-64
Notice that this screen is similar to that for SysEx Save. The
selection procedure is the same for either operation. See ÒSaving
Setups (SysEx Dumps)Ó on page 89 for details on using this
screen to specify what you want to reload.
90
UTILITY