Selecting Setups; Basic Selection; Using Setup Lists - Kurzweil ExpressionMate User Manual

Getting Started
Setups

Selecting Setups

Basic Selection

After the ExpressionMate starts up for the Þrst time, youÕll see a
screen such as this:
SU 3
Big Strum
This is the main ÒPlay modeÓ screen. At the top-left is the number
of the currently selected Setup. Below that is the Setup name. You
use the data knob and the - and + buttons to change Setups.

Using Setup Lists

Pressing the < or > buttons lets you choose a Setup from one of
three Setup Lists.
If you press either button while in Play mode, the screen will
change to this:
SU 3 LS1 STEP1
Big Strum
The top line now shows the Setup number on the left, followed
by the current List and the current Step within that List. Press the
< and > buttons together to go to the next List, and press either <
or > to change the current Step.
Setup Lists let you organize Setups so that theyÕre easier to Þnd
during live performances. For instance, if you use the same Þve
Setups every time you play out, you could create a list containing
those Þve Setups. (See page 87 for steps on doing this.)
Moving the data knob or pressing the - and + buttons takes you
out of the Setup Lists.
16
Jump Value
Jump Param
L ist
|
S tep