Table of Contents
Advertisement
Accessories
adapter cable. Cordless headsets are connected to the headset socket via a special
"Hookswitch Control Cord" adapter cable. This are included in the delivery.
The chapter system components will show you all headsets that can be used with Avaya 1400
Series telephones.
For using the headsets see the headset's and telephone's user guides.
About operating headsets
• A cordless headset is connected to the headset socket of the Avaya 1400 Series
telephones via a special "D+M" adapter cable. This adapter must be connected
directly to the telephone. Do not connect it to the base station because of strong
whistling noises caused by acoustic feedbacks. The "HIS" adapter cable for corded
headsets or the "9600 Hookswitch Control Cord" adapter cable cannot be used.
• Do not change the default Off setting in Menu > Settings > Remote headset. On
causes undesirable audible DTMF-signals. This setting (On) will only be needed for
new Savy Office (Hydra) headsets.
• The acoustic ring signal on the telephone is transferred to the cordless headset via a
separate call detector cable with its own (separate) microphone. This separate
microphone must first be attached to the grid of the telephone speaker. For mounting
see the headset's user's guide.
• Avaya 1400 Series telephones cannot control a cordless headset without DTMF-
signaling, i. e. the cordless headset cannot be switched to online or offline mode with
the HEADSET key on the telephone.
• The call signal on the telephone must not be set to Off. Otherwise, the call will not be
signaled on the headset.
• Second calls are not signaled on the headset.
• If you are placing a call with the headset, and the other party terminates the
connection, you must also press the call button on the headset so that your telephone
will also be disconnected from the line.
52
1408/1416 Telephones IAM Guide
Note:
Cordless headsets with a connection via the AEI interface cannot be connected to
Avaya 1400 Series telephones.
Note:
You can also use the HEADSET key to seize the line or end a call. In order to place a
call correctly using the cordless headset, the headset must always be in headset
mode (online). When doing so, however, you must never press the talk button on
the headset itself.
January 2010
Advertisement
Table of Contents
