Attaching The Vertical Battery Grip - FujiFilm X-T4 Owner's Manual

Attaching the Vertical Battery Grip

(A)
(A)
N •
Check that the camera is off before attaching or removing the vertical
battery grip.
•
The camera vertical battery grip contact cover (A) can be stored in
the grip. Keep the grip contact cap (B) in a safe place when not in use.
•
O
Fully tighten the lock screw knob after attaching the grip.
•
Do not touch the contacts.
•
After removing the grip, replace the grip contact cover (A) and con-
tact cap (B).
•
The grip is not waterproof, and caution is required to prevent the en-
try of dirt, dust, water, noxious gases, salt, and other foreign matter.
Do not place the grip on wet surfaces. Before use, be sure that the
battery tray and battery-chamber cover are fully closed.
(B)
Vertical Battery Grips
279
10