Time Code Setting (Movie Recording); Time Code Display; Start Time Setting; Count Up Setting - FujiFilm X-T4 Owner's Manual

TIME CODE SETTING (Movie Recording)

Adjust time code (hour, minute, second, and frame num-
ber) display settings for movie recording.
To display focus settings, press MENU/OK
in the shooting display and select the
Q ( TIME CODE SETTING) tab.
N
The options available vary with the shooting mode selected.

TIME CODE DISPLAY

Select ON to display time codes during movie recording and
playback.
ON

START TIME SETTING

Choose the time code starting time.
Option Option
MANUAL INPUT
CURRENT TIME
RESET

COUNT UP SETTING

Choose whether time is clocked continuously or only during
movie recording.
Option Option
REC RUN
FREE RUN
Options Options
Highlight this option and press the selector right to choose a
start time manually.
Set the start time to the current time.
Set the start time to 00:00:00.
Time is clocked only during movie recording.
Time is clocked continuously.
TIME CODE SETTING
TIME CODE DISPLAY
START TIME SETTING
COUNT UP SETTING
DROP FRAME
HDMI TIME CODE OUTPUT
OFF
Description Description
Description Description
EXIT
6
177