Ef-X8 - FujiFilm X-T4 Owner's Manual

EF-X8

The following settings are available when an optional EF-X8
shoe-mounted fl ash unit is attached.
Setting Setting
A
Flash control mode
10
268
MODE
Choose from the following options:
•
TTL: TTL mode. Adjust fl ash compensation (
C
a fl ash mode ( ).
•
M: The fl ash fi res at the selected output (
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and check the
results.
•
C (COMMANDER): Choose if the fl ash is being used to con-
trol remote synced fl ash units, for example as part of a stu-
dio fl ash system.
•
D (OFF): The EF-X8 does not fi re. Flash units connected
via the sync terminal will still fi re when the shutter is re-
leased, but can be disabled by lowering the EF-X8 and turn-
ing the units off in the fl ash settings menu.
EF-X8
ADJUST END
Description Description
B
) and choose
B
) regardless of