Basic Antenna Connection - Magnavox 20MS3442/17OM Owner's Manual

A combination antenna receives normal
broadcasting channels (VHF2-13 and UHF
14-69). Your connection is easy since you
will connect the antenna to the 75OHM
ANTENNA INPUT jack on the rear of the
TV.
If your antenna has a round cable (75
ohm) on the end, then you are ready to
connect it to the TV. Go to step 2.
If your antenna has flat twin-lead wire
(300 ohm), you first need to attach the
antenna wire to the screws on a 300 to
75 ohm adapter (not supplied with TV).
Push the round end of the adapter or
antenna cable onto the 75 OHM ANTE-
NNA INPUT jack on the rear of the TV. If
the round end of the antenna cable is
threaded, screw it down finger tight.
Plug the TV power cord into a power
s
outlet and turn on the TV. Set TV/CATV
to CATV as detailed on page 11.
Refer to AUTO SEARCH to set up your
available channels. Details are on page 12.

Basic Antenna Connection

If you have separate UHF and VHF antennas, you need an
optional combiner to connect to the TV.
UHF Antenna
VHF Antenna
VHF Antenna
Note: this TV has no hand grip, which
is a recess at either side of the cabinet
for ease of transportation of bigger sets.
75-300 Ohm Adapter
6
75 OHM
ANTENNA
INPUT
OR
UHF/VHF
Combiner
Rear of TV
DVD INPUT
75OHM
Cr Cb Y ANTENNA
INPUT
IN2
OUT
R - AUDIO - L VIDEO
DVD INPUT
75OHM
Cr Cb Y ANTENNA
INPUT
IN2
OUT
R - AUDIO - L VIDEO