Angle Sensor - NEC PE506WL User Manual

Angle sensor

The installation angle range that the built-in angle sensor of the projector can detect is shown in the figure
below.
[PE506UL/PE506WL]]
[PE456USL/PE456WSL]
When selecting [Auto ceiling /
Front] or [Auto ceiling / Rear] as
projection way, the projector will
be judged as the front projection
automatically .
120°
120°
When selecting [Auto ceiling /
Front] or [Auto ceiling / Rear] as
projection way, the projector will
be judged as the front projection
automatically .
When selecting [Auto ceiling /
Front] or [Auto ceiling / Rear] as
projection way, the projector will
be judged as the front projection
automatically .
120°
120°
When selecting [Auto ceiling /
Front] or [Auto ceiling / Rear] as
projection way, the projector will
be judged as the front projection
automatically .
When selecting [Auto ceiling /
60°
Front] or [Auto ceiling / Rear] as
projection way, the projextor will
be judged as the ceiling projection
automatically .
60°
When selecting [Auto ceiling /
60°
Front] or [Auto ceiling / Rear] as
projection way, the projextor will
be judged as the ceiling projection
automatically .
60°
9
1. Introduction