[Laser Control] - NEC PE506WL User Manual

3) Press ▲ ▼ button to select rate: 4800/9600/19200/38400.
Setting
On start
Standby mode
High altitude
Cooling fast
Key lock
Contrast optimization
Baud rate
Laser control
Sound
HDMI setup

[Laser control]

Change light source brightness according to the environment and aim your projector is operating.
1) Press ▲ ▼ button to select [Laser control] menu.
2) Press the ENTER button.
3) Press ▲ ▼ button to select [ECO mode] or [Laser adjust].
4) Press the ENTER button.
ECO mode
Normal brightness, the screen becomes brighter. Alternatively, you can adjust from
Normal
50%~100%. Default is 100%.
ECO.1/ECO.2 Lower the brightness and reduce energy consumption.
Full normal The brightness is the same as normal mode, but it is not adjustable
Laser adjust
This function is valid only in Normal mode, and the adjustable range is 50%-100%. And the menu will turn gray on
ECO.1, ECO2 and Full normal mode.
Setting
On start
Standby mode
High altitude
Cooling fast
Key lock
Contrast optimization
Baud rate
Laser control
Sound
HDMI setup
NOTE:
• Laser adjust option can be chosen only in Normal mode.
Off
Normal
Off
60 Sec
Off
Off
9600
Setting
Off
Normal ECO mode
Off Laser adjust
60 Sec
Off
Off
9600
45
5. Using On-Screen Menu
Laser control
Normal
100%