Power Linking Of Multiple Devices; Setup; Warnings And Precautions; Stand-Alone Setup - Infinity Raccoon P14/4 User Manual

Table of Contents

Advertisement

Raccoon P14/4

Power Linking of Multiple Devices

This device supports power linking. Power can be relayed to another device via the power OUT
connector. Note that the input and the output connectors have different designs: one type cannot be
connected to the other.
Power linking of multiple devices must be carried out only by instructed or skilled persons.
WARNING
Incorrect power linking may lead to overload of the electrical circuit and result in serious
injuries and damage of property.
To prevent overload of the electrical circuit, when power linking multiple devices:
Use cables with sufficient current-carrying capacity. The power cable supplied with the device is not
suitable for power linking of multiple devices.
Make sure that the total current draw of the device and all connected devices does not exceed the
rated capacity of the power cables and the circuit breaker.
Do not link more devices on one power link than the maximum recommended number.
Maximum recommended number of devices:
at 100–120 V: 3 devices
at 200–240 V: 6 devices
5.

Setup

Warnings and Precautions

DANGER
Electric shock caused by short-circuit
This device is IP65 rated.
Do not expose the device to conditions that exceed the rated IP class conditions.
Keep the connectors sealed with the rubber caps when the connectors are not in use.
Do not connect the cables from above the connectors, if the device is installed outdoors. Make a
'drip loop' in the cable so that rain water cannot enter the device.
Make sure that the cable run is not too heavy. A heavy cable run can cause damage to the
connectors. If the connectors are damaged, their ingress protection (IP) can deteriorate.
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.

Stand-alone Setup

When the Raccoon P14/4 is not connected to a controller or to other devices, it functions as a stand-
alone device.
For more information about the control modes, refer to 6.2. Control Modes on page 20.
Product code: 200500
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

200500

Table of Contents