Minolta DIMAGE SCAN MULTI II F-3100 Instruction Manual page 6

SOFTWARE REGISTRATION
Please register this software before using it.
You will receive technical support, as well as software upgrade and product information once this
software is registered. Complete and return the enclosed Product & Software Registration form
after detaching it from the Warranty. No postage is necessary.
• The information provided in the questionnaire will only be used for Minolta customer service
and product research & development. The information you provide will be kept private and
confidential.
The Dimage Scan Multi II and the supplied software are not designed for use with sepia color
film. However, if you intend to use sepia color film, select Color Negative in the film type (p.xx).
After the final scan, retouch the saved image using the image editing application so that a
sepia tone is reproduced.
Also, when scanning sepia color film with an APS cassette, [The film type cannot be selected.]
appears if the Auto Detect (color) is selected in the film type. In this case, select Color
Negative and perform the final scan. After the final scan, retouch the saved image using the
image editing application so that a sepia tone is reproduced.
– 6 –