Minolta DIMAGE SCAN MULTI II F-3100 Instruction Manual page 103

SLIDE FEEDER (optional accessory)
5
Specify the file destination and input
the file name to be saved.
6 When using the DS Multi II Utility
software, select the file type to be
saved from the [Save as Type] list box
(or the file format pull-down menu).
• When selecting JPEG as a file type, select
the compression rate from the 3 items.
• The number of frames with which
[Continuous Scanning -> Continuous
Loading] can be performed varies depending
on the image editing application. For details,
refer to the instruction manual supplied with
the image editing application you use.
7 Click on [Save] (or [OK]).
• The final scan will begin.
• Every time an image is scanned, the image
is saved with the input file name adding a
serial number of 2 digits in the specified loca-
tion and file type.
For example, when inputting My_Birthday as
a file name and specifying JPEG as a file
type, the image is saved with the file name of
My_Birthday01.jpg, My_Birthday02.jpg,
My_Birthday03.jpg, My_Birthday04.jpg... .
– 103 –