Konica Minolta PagePro 1350W User Manual page 60

Symptom
Print too dark
Blurred
background
Uneven print
density
Irregularities
54
Cause
The toner cartridge may be
defective.
The "Contrast" and "Bright-
ness" of an image is not set
correctly in the printer driver.
The toner cartridge may be
defective.
The toner may be unevenly
distributed inside the toner
cartridge.
The toner cartridge may be
defective.
The image transfer roller may
be defective.
The media may have absorbed
some moisture due to high
humidity or because of direct
contact with water.
Solution
Remove the toner cartridge
and check it for damage.
Replace the toner cartridge, if
necessary.
In the printer driver, select the
Quality tab and adjust the
Contrast and Brightness and
try printing again.
Remove the toner cartridge
and check it for damage.
Replace the toner cartridge, if
necessary.
Remove the toner cartridge
and shake it left and right a few
times to distribute remaining
toner.
Remove the toner cartridge
and check it for damage.
Replace the toner cartridge, if
necessary.
Contact your local vendor.
Since toner will not adhere well
to wet media, replace the
media you are using with dry
media and try printing again.
Solving Problems-Printing Quality