Working With The Status Display; Introduction; Environment; Opening The Status Display And Showing The Supplies Status - Konica Minolta PagePro 1350W User Manual

Working with the Status Display

Introduction

The Status Monitor shows information about the current status of the com-
puter's local printer.

Environment

The Status Display can be used with Windows XP, 2000, Me, and 98SE con-
nected via a parallel cable or USB cable.
Opening the Status Display and Showing the Supplies
Status
Use one of the following steps to open the Status Display.
!
Windows XP—Choose Start, All Programs, then KONICA MINOLTA
PagePro 1350W Utilities, and then KONICA MINOLTA PagePro 1350W
Status.
!
Windows Me/2000/98SE—From the Start menu, choose Programs, then
KONICA MINOLTA PagePro 1350W Utilities, and then KONICA MINOLTA
PagePro 1350W Status.

Altering the Size of the Status Display Window

!
From the Display menu, choose Status (Reduce) to decrease the size of
the window, or
!
From the Display menu, choose Status (Expand) to increase the size of
the window.

Using the Status Display

!
When the background of the right-hand printer graphic is green, the
printer is in standby mode or a job is printing normally.
!
When the background of the right-hand printer graphic is red, there is an
error and the job has been interrupted. The status of the printer and the
error message are shown in the dialog boxes on the left.
The function areas include:
!
Printer status—Displays text messages that describe the current opera-
tional status of the printer.
!
How to recover—Provides you with explanations of what you need to do
in order to correct problems and recover from error conditions.
16 Working with the Status Display