Storing The Printer; Relocating Your Printer - Konica Minolta Magicolor 2300W User Manual

Attention
The instructions and replacement partnumbers given in this chapter are
for the Americas. For locations outside the Americas, refer to
www.konicaminolta.net/printer/ or contact your local KONICA MINOLTA
representative.
Attention
Failure to follow these instructions could result in voiding your
warranty.

Storing the Printer

Unplug the printer when storing it for an extended period. Protect it from
extremes in temperature and humidity, and from dust.

Relocating Your Printer

Occasionally, you may have to move your printer to a different location, either
nearby or to a distant location. To avoid damage to your printer, we advise
you to follow the next instructions very carefully.
1
Turn off your printer.
2
Remove the power cord and all interface cables.
3
If you are moving to a distant location, follow the instructions for repacking
the printer (see page 111).
4
Relocate the printer.
WARNING!
Your printer weighs approximately 62 lbs (28 kg). Be sure to have
help when lifting and moving it.
5
Unpack and set up the printer in its new location.
Use the unpacking and setup instructions in the Installation Guide.
6
Reconnect the power cord and all interface cables.
We strongly suggest that you save the packaging materials in case
you ever need to move or ship the printer, and that you order the
KONICA MINOLTA 2300 Series Repacking Kit 2600733-100.
110 Storing the Printer