Status, Error, And Service Messages; Standard Status Messages - Konica Minolta magicolor 3730DN User Manual

Status, Error, and Service Messages

Status, error, and service messages are displayed in the control panel mes-
sage window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.

Standard Status Messages

This message...
CALIBRATION
CANCELLING JOB
ENERGY SAVER
CONTROLLER FW
UPDATING
ENGINE FW UPDATING
CONTROLLER FW
DOWNLOADING
ENGINE FW DOWN-
LOADING
CONTROLLER FW DWLD
COMPLETE
ENGINE FW DWLD
COMPLETE
PRINTING
Status, Error, and Service Messages
means...
After replacing a toner car-
tridge or after rebooting your
printer after environmental
changes, your printer auto-
matically pauses to do an
Auto-Image Density Control
(AIDC) cycle. This process
is provided to make reliable
printer operation with opti-
mum output quality possible.
The job is being cancelled.
The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power.
The firmware is being
updated.
The firmware is being down-
loaded.
Downloading of the firmware
is finished.
The printer is printing.
do this...
No action needed.
7-35