Atf Circuit; Overview - Atf Circuit - Audi Q5 2008 Repair Manual

7

ATF Circuit

⇒ "7.1 Overview - ATF Circuit", page 117
⇒ "7.2 ATF Cooler, Removing and Installing, Vehicles with 3.0L
TDI Biturbo Engine", page 122
⇒ "7.3 ATF Filter, Removing and Installing", page 125
⇒ "7.4 Automatic Transmission Fluid Lines, Cleaning",
page 126
⇒ "7.5 ATF Pipes, Removing and Installing", page 127
7.1

Overview - ATF Circuit

⇒ "7.1.1 Vehicles with a 2.0L TFSI Engine", page 117
⇒ "7.1.2 Vehicles with a 3.0L TFSI engine", page 119
Note
Clean working conditions for the automatic transmission. Re‐
♦
fer to ⇒ "3.1 Clean Working Conditions, Guidelines", page 5
General repair instructions. Refer to
♦
⇒ "3.3 General Repair Information", page 6
Seal the open lines and connections with clean plugs from the
♦
-VAS6122- .
Check ATF level after replacing ATF pipes. Refer to
♦
⇒ "6.2 ATF Level, Checking", page 110
Caution
Danger of causing damage to the transmission.
♦ Remove all the plugs on the ATF pipes and on the trans‐
mission that were installed during removal.
♦ The ATF cooling function will not work and the transmis‐
sion will be damaged if the plugs are forgotten.
7.1.1 Vehicles with a 2.0L TFSI Engine
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
.
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
.
.
117
7. ATF Circuit