QMS 2060 Getting Started page 76

7 In the QMS GX Drivers Installer dialog box, verify the Install
Location.
To change the Install Location you can either use the drop-down
list box to display and select the appropriate disk drive, or choose
the Switch Disk button to scroll through the available disk drives.
8 Choose Easy Install or Custom Install.
Easy Install automatically installs all of the GX drivers avail-
able on the CD-ROM for QMS printers.
Custom Install allows you to select the GX driver(s) for the
specific QMS printer(s) you want to install. For example, if
you wanted to install the GX drivers for the QMS 2060, but
not for the other listed QMS printers, you would click the
check box next to this driver only.
The amount of available space on your Macintosh hard disk
and the amount of space necessary for all of the selected
drivers are indicated near the bottom of the window.
Note: If you're using Custom Install, you can click the small
»
icon to the right of each install option for more information
about that option.
9 Click Install to begin the installation.
When the installation is complete, a dialog box prompts you to
choose Continue to install additional drivers from the Custom
Install option or to choose Quit to exit from the Install program.
Use the following instructions if you're installing the printer driver from
a 3.5" disk.
1 With the Macintosh on, insert the QMS GX Drivers disk in the
disk drive.
2 In the QMS GX Drivers disk window, double-click the QMS
GX Drivers Installer icon to open the Installer.