QMS 2060 Getting Started page 72

This chapter describes the printing software you'll need to print from a
Macintosh.
If you're connecting to a Macintosh through an optional LocalTalk
interface, refer to chapter 3, "Interfaces and Daughterboards," in
the Options manual for installation and connection information.
If you're connecting to a Macintosh through an Ethernet network,
refer to chapter 4, "Connecting to an Ethernet Network," for con-
nection information.
If you're replacing a PostScript printer, you can probably start printing
now with the printing software already in place. Refer to your applica-
tion documentation for instructions on sending documents to the
printer.
However, if you want to be able to use all your printer's special fea-
tures (like collation, 600x600 dpi and 1200x1200 dpi printing, if the
Multi-Res daughterboard is installed), or if you have never printed to a
PostScript printer before, we recommend you take a few minutes to
make sure you have the following printing software installed:
QMS Macintosh Utilities
A PostScript printer driver
Application-specific printer files