QMS 2060 Getting Started page 59

The printer provides a twisted-pair (10BaseT) Ethernet interface.
Twisted-pair Ethernet connections use RJ45 connectors.
1 Turn off the printer, and unplug the power
cord.
2 Connect one end of the twisted-pair Ethernet
cable to the printer's Ethernet port.
3 Connect the other end of the cable to the
10BaseT concentrator.
4 Plug in the printer, and turn it on.
Crownnet software, while not required, will make the installation pro-
cess easier. it can also be used to facilitate management of the QMS
Print System after installation.
For complete instructions, refer to the QMS CrownNet Setup Guide
on the QMS Software Utilities CD-ROM.