Replacing The Adf Snap-In Pad Module - QMS SC-110 User Manual

9.3.2 REPLACING THE ADF SNAP-IN PAD MODULE

After scanning approximately 20,000 pages through the ADF, the pad
may be worn out and you may experience problems with document
feeding. In this case, it is highly recommended to replace the pad
module with a new one. For ordering the pad module, please consult
your nearest dealer and follow the procedure below to replace it.
Disassembling Procedure
1. Gently open the ADF front cover to the left.
2. Press both arms of the ADF snap-in pad module inwardly with
your two fingers to pull out the ADF snap-in pad module.
9-15
ADF Pad