7.
TROUBLESHOOTING
If you have any operational problem, please refer to the following
troubleshooting hints.
7.1
QUESTIONS AND ANSWERS
Question:
Answer:
Question:
Answer:
Question:
Answer:
Why does the scanned image always come out to be
too dark?
1) Modify the Gamma setting to 1.8 for your monitor
and, when printing, set Gamma to 2.2 for your printer.
2) Use the Brightness setting of the TWAIN user
interface to get a brighter image.
The scanning speed of my SC-110 is much slower
than that of those installed at other computers. Can I
speed it up?
Set you PC printer port to the EPP mode from BIOS
setting.
Why does my SC-110 scan at a very low speed?
If you have installed Works for Windows, it will install
Window Printing System (WPS) in your WIN.INI file.
This will take up the printer port time remarkably.
You can remove the WPS from your WIN.INI file, as
follows:
7-1