Table of Contents
Advertisement
4. Hole Punch: If the output bin selected supports hole punch,
the job will be hole-punched if enabled.
Off
On
5. Collate: Multiple pages can be copied either as complete sets in
numeric order or as separate sheets.
Off
On
6.
End Job Mode: This printer mode enables the printer to identify the
end of each job to ensure correct printing respectively.
None
QMS EOD
HP EOD
Note: The type of End Job Mode set on SC-110 must match that on
QMS Print System.
7. Input Tray: This printer mode selects the input tray to pull paper from.
Refer to the chart on page 11for your particular printer type and
options.
8. Output Tray: This printer mode selects the output tray to push paper
to after printing. Refer to the chart on page 11for your particular printer
type and options.
Pages are not punched.
Pages are punched.
Pages are not collated.
Pages are collated.
No End Job Mode
QMS -formatted End Job Mode
HP -formatted End Job Mode
- 3-8
Advertisement
Table of Contents
