Changing Your Copy Density; Choosing Your Copy Quantity - QMS SC-110 User Manual

3.4.4 CHANGING YOUR COPY DENSITY

Copy density refers to the degree of darkness which the SC-110 has
reproduced. There are times when your original is unsatisfactorily darker
or lighter. It is of great advantage to use the density feature to
compensate the unsatisfactory original.
The Operating Steps:
Place your original face down on the document glass.
1.
Press the "Lighter/Darker" button. The Message Window displays the
2.
default degree of darkness.
3. Repress the "Lighter/Darker" button to select one of the other levels.
Or you may press the "s" to increase the level, press the "t" button
to decrease the level.
4. Press the Copy button. Your printout shows the darkness or
brightness has been compensated.

3.4.5 CHOOSING YOUR COPY QUANTITY

The Operating Steps:
Place your original face-down on the document glass .
1.
The default copy count is 1. If you need to make 3 copies, for
2.
example, press the "Copy Count" button and the Message Window
displays "2 copy @100%".
3. Repress the "Copy Count" button and the Message Window displays
"3 copy ...".
4. Press the Copy button. After a few seconds, you have 3 copies from
your printer.
ã Note:
Another option to change your copy quantity is to press the "s"
button to increase the number or the "t" button to decrease the
number.
The maximum copy quantity is 99.
3-13