Minimum Chimney Height - Drolet CAPE TOWN 1800 Installation And Operation Manual

Mounting the flue collar for rear venting:
Step 1:
Remove the cover plate on the rear
of the stove. Remove the connection
collar from the top of the stove. Mount
the connection collar on the rear of the
stove and the cover plate on the top of
the stove.
Step 2:
Remount the cover plate in the top outlet
using the same bracket and fasteners
that you removed in step 1.
9.3

Minimum Chimney Height

The top of the chimney should be tall enough
to be above the air turbulence caused when
wind blows against the house and its roof.
The chimney must extend at least 3 ft. (1 m)
above the highest point of contact with the
roof, and at least 2 ft. (60 cm) higher than
any roof line or obstacle within a horizontal
distance of 10 ft. (3 m).
Page 40
Cover plate
Extension
collar
Installation and Operation Manual - Cape Town 1800