Battery-Power Indicators; Auto Power Off - Minolta Dimage E201 Instruction Manual

• After replacing the batteries, check that the clock in the camera (date and time) is
correct (p. 71 - 74). When the AC adaptor is not used and the battery/card-chamber
door remains open for more than 10 minutes, the clock in the camera may be
delayed or reset to the default setting. If this happens, set the date and time by
following the directions on pages 71 - 74.

BATTERY-POWER INDICATORS

This camera is equipped with an automatic battery-condition indicator. When the
camera is on, the battery-condition indicator appears on the data panel on the top of
the camera. If the data panel is blank, the batteries may be dead or installed incorrectly.

AUTO POWER OFF

To conserve battery power, the camera will shut down if an operation is not made
within 3 minutes. To restore power in the recording mode, turn the camera off and on.
To restore power in the playback mode, press and hold display/enter button to activate
the LCD monitor.
• When using batteries, the length of the auto-power-off period can be changed in the
setup mode (p. 71 - 74).
• When using the AC adaptor, the auto-power-off period is set at 30 minutes.
Full-Battery icon - the battery is fully charged.
Low battery icon - the battery is not fully charged, but all
functions are operational.
Low battery icon - battery power is very low, but all
functions are operational. The batteries should be replaced
as soon as possible.
Blinking low battery icon - power is insufficient for camera
operation. The shutter will not release. Replace the
batteries immediately. The icon will appear for five seconds
before the camera shuts down.
- 21 -