Ndi Config W - JVC KY-PZ510NWU Instructions Manual

4k ptz remote camera
Hide thumbs Also See for KY-PZ510NWU:
Table of Contents

Advertisement

Port Settings
9 HTTP Port
For configuring the HTTP port.
[Setting Values: R80 or 1025 to 65535]
9 UDP Port
For configuring the UDP port.
[Setting Values: 1025 to 65535 (R1259)]
9 Standard Protocol
Displays the Standard Protocol port number.
Memo :
Not changeable.
0
Lan Settings
9 IP Configuration Type
For selecting the method for configuring the IP
address.
[Setting Values: Dynamic IP Address, RFixed IP
Address]
9 IP Address
Displays the current IP address.
The IP address of the camera can be configured
manually when [IP Configuration Type] is
configured to "Fixed IP Address".
The default value is 192.168.0.10.
9 Subnet Mask
Displays the address of the current subnet mask.
The subnet mask of the camera can be configured
manually when [IP Configuration Type] is
configured to "Fixed IP Address".
9 Gateway
Displays the address of the current default
gateway.
The default gateway of the camera can be
configured manually when [IP Configuration Type]
is configured to "Fixed IP Address".
9 DNS Address
Displays the current DNS address.
The DNS address of the camera can be configured
manually when [IP Configuration Type] is
configured to "Fixed IP Address".
9 MAC Address
Displays the MAC address of the camera.
Memo :
Not changeable.
0

NDI Config W

This is the setting screen for the NDI (Network
Device Interface) protocol.
After configuring the items, press the [Submit&
Reboot] or [Submit] button.
The settings will be applied when the camera is
next restarted.
NDI Settings
9 NDI Local Device Name
For configuring the device name displayed in the
NDI application.
[Default Value: PZ510]
Memo :
The following setting values are common. Any
changes made to an item will cause the other items
to be changed at the same time.
[Network] B [ZeroConfig] B [Hostname Prefix]
0
[NDI Settings] B [NDI Settings] B [NDI Local
0
Device Name] W
[Information] B [Information] B [Device ID]
0
9 NDI Receive Group
For configuring the group name to be used for the
NDI application.
The default value is "public".
9 NDI Firmware Version
Displays the NDI firmware version.
37
Network

Advertisement

Table of Contents
loading

Table of Contents