Table of Contents
Advertisement
Infrared Remote Control
A
1
STD
1
B
4
7
C
F1
D
PRESET
E
F
SLOW
G
H
L/R SET
I
AUTO
.
A STANDBY button
Switches between the standby and normal
modes.
B NUMBER button
For preset configuration or invoking a preset
number.
C Z button
To be used together with other buttons.
D PRESET button
Stores the preset position.
[PRESET] + NUMBER button (1 to 9):
Stores the preset position in the selected
NUMBER button.
Memo :
Press the buttons above in sequence.
0
E HOME button
Restores the orientation of the camera to face
the front.
Functions as a confirmation button when the
menu is displayed.
F RETURN button
Functions as a cancel button when the menu is
displayed.
G ZOOM button
SLOW ZOOM:
Zooms in [+] or zooms out [-] the camera at a
low speed.
FAST ZOOM:
Zooms in [+] or zooms out [-] the camera at a
high speed.
Q
CAMERA SELECT
2
3
4
REV
2
3
5
6
8
9
P
0
O
F2
F3
F4
OFF
AUTO TRACKING
N
RESET
M
HOME
L
MENU
ZOOM
FAST
K
BACKLIGHT
P/T RST
J
FAR
NEAR
MANUAL
FOCUS
H L/R SET button
Press the button together with the NUMBER
button [1] or [2] at the same time to pans the
camera toward the left or right.
Pressing the left or right side of the [L / R
0
SET] + [1] (STD) at the same time pans the
camera toward the left or right accordingly.
Pressing the left or right side of the [L / R
0
SET] + [2] (REV) at the same time pans the
camera toward the right or left accordingly.
This setting comes in handy in cases such as
when the camera is suspended from the
ceiling.
I FOCUS button
For adjusting the focus.
[AUTO]:
0
Auto Focus mode (AF)
[MANUAL]:
0
Manual Focus mode (MF)
During MF, focus is adjusted using [FAR]
0
(for setting focus on a distant subject) and
[NEAR] (for setting focus on a nearby
subject).
J P/T RST button
Resets the pan and tilt positions.
K BACKLIGHT button
Press the button to enable backlight
compensation. Pressing the button again
disables backlight compensation.
Memo :
This feature is available only when [Exposure] is
0
configured to "Auto".
Use this feature when there is a light source
0
behind the subject that causes the subject to
appear dark in the image.
L MENU button
Displays the menu or exits the menu display.
M PAN/TILT CONTROL button
Press the arrow button to pan or tilt the camera.
Pressing the [HOME] button restores the
orientation of the camera to face the front.
Moves the cursor when the menu is displayed.
N RESET button
Erases the preconfigured settings.
[RESET] + NUMBER button (0 to 9):
Erases the preset position in the selected
NUMBER button.
[Z] + [#] + [RESET]:
Erases all the preset positions.
Memo :
Press the buttons above in sequence.
0
19
Names of Parts
Advertisement
Table of Contents
