Auto Flash Without Red-Eye Reduction; Fill Flash - Kodak Advantix C650 User Manual

Auto flash without red-eye
reduction
Use this mode for taking pictures
without people.
You can change the default setting to
auto flash without red-eye reduction by
following the steps below:
1. Move the /
ON OFF SWITCH
"ON" position to turn the camera on
and to raise the
2. Press the
FLASH
repeatedly until the
(36) appears on the
INDICATOR
(5).
LCD PANEL
3. Frame your subject within the
VIEWFINDER EYEPIECE
4. Partially depress the
(16). When the
BUTTON
(18) glows green, fully
READY LAMP
depress the shutter button to take
the picture.
• The camera will now default to the
auto-flash mode without red-eye
reduction.
14
(20) to the
(9).
FLASH
- (7)
MODE BUTTON
-
AUTO FLASH
(19).
SHUTTER
/
FLASH CAMERA

Fill flash

When bright light indoors or outdoors
comes from behind the subject (backlight-
ing), dark shadows (especially on faces)
may occur. Use fill flash to lighten
these shadows.
1. Move the
"ON" position to turn the camera on
and to raise the
2. Press the
repeatedly until the
INDICATOR
(5).
PANEL
3. Frame your subject within the
VIEWFINDER EYEPIECE
4. Partially depress the
BUTTON
READY LAMP
-
depress the shutter button to take
the picture.
/
ON OFF SWITCH
(9).
FLASH
-
FLASH MODE BUTTON
-
FILL FLASH
(32) appears on the
(19).
SHUTTER
(16). When the
FLASH
(18) glows green, fully
(20) to the
(7)
LCD
/ -
CAMERA