Basic Function; Handset Vibration Setting - ClearSounds CS-A55 Owner's Manual

Auto Amplify Off
To set your handset in the standard mode so that it will reset to normal
sound levels when you hang up. This allows people who do not require the
level of amplification offered on the phone to use it.
Turn the "AUTO AMPLIFY" switch in the battery compartment to the OFF
(down) position. The amplify feature is automatically deactivated each
time you use the phone. You will manually need to activate the function
temporarily by pressing the "AMPLIFY" button.
Caution: When the "AUTO AMPLIFY" switch is set to ON, the handset volume
will be set to loud. To protect people who do not experience a hearing loss,
we suggest setting the switch to oFF. You may turn the extra amplification
feature back on by pressing the "AMPLIFY" button.

Handset Vibration Setting

The vibration call alert feature notifies you of incoming calls by making
the handset vibrate. When an incoming call is received, you can turn the
vibrate/shake mode to on (up) position, and the handset will vibrate/shake.
To turn OFF this function, just turn the switch to oFF (down) position.
fLASH (f) function
press to answer an incoming call if you have call Waiting (if you
subscribe to the service from your local phone company).

BASIC fUNCTION

To make A Call
Press the TALK button and wait for a dial tone.
Dial the telephone number
Note: During the call you can press the F button to switch over to
another call while using call waiting.
To Receive a Call
To receive a call simply pick up the handset and press the TALK
button.
To End a Call
Simply press the TALK button.
Using the Pre-dialing function
In standby mode, dial your desired number, You can press F to delete
any numbers entered in error.
If the phone number is correct, press TALK button to dial the number.
9 – ENGLISH