Configuring Image
settings
4
The main ISIS Driver window provides a set of several tabs for
configuring images. You can select each of these tabs and make any
choices necessary to meet your scanning needs.
NOTE: The Image Mode, Camera, Mode and Toggle Patch selections
are available with all of the Image tabs (i.e., Main, Layout,
Image Processing, etc.).
Image mode — select one of the following options:
• Normal — typically, for a document, one image is created for the
front side and another image is created for the back side. Select this
option if you want the front and back side to be individual images.
• Merged — select this option if you want one image that contains both
the front side and back side of the document. Image Merge options
are:
- Front on Top; Front on Bottom; Front on Left or Front on Right.
Camera — the selections in the Camera box list the available sides
(front and back) of an image where you can define individual image
processing values. Options include: Front Image #1, Front Image #2,
Back Image #1 and Back Image #2.
The Kodak Scanner drivers allow you to control the camera settings
independently. Some settings apply only to black and white images,
others apply to color/grayscale images.
A-61654/ISIS December 2009