Memory card slot - SD, MMC, xD, MS DC-In (12 V) Remote control holder (removable) Slots for remote control holder Frame stand (to install, see www.kodak.com/go/digitalframesupport 7 Power 8 Play/Pause 9 Stop/Back 10 Menu; Reset (press and hold 5 seconds)
Getting started Using the remote control menu back Remove the tab to activate the remote www.kodak.com/go/digitalframesupport Button Press to: power turn on/off the picture frame. menu display the menu choices. home return to the home screen. back return to the previous screen.
1 Install the remote control holder on the back of the frame (page 2 Slide the remote into the holder for convenient, out-of-the-way storage. www.kodak.com/go/easysharecenter Push and hold the release tab* while pulling the battery holder out of the remote. Follow the graphic on the back of the remote control.
Do not use this power cable with other devices, including digital cameras; the higher voltage (12 V) required by the frame will cause serious damage to other devices. www.kodak.com/go/digitalframesupport 1 Place the square tab of the stand into the slot on the back of the frame.
OK. ■ To change the language at a later time Press Home , Settings ■ page ■ Standby mode—Press the power button on the remote control or on the frame. ■ Power off—unplug the power cable. www.kodak.com/go/easysharecenter → Language. See...
Viewing your first slide show! To play a slide show, insert a memory card, camera, or other USB device (see The pictures are automatically displayed in the order they appear on the card or USB device. www.kodak.com/go/digitalframesupport Getting started page...
All connected sources and the Settings icon are displayed. 2 Press to highlight a picture source, then: ■ Press to start a slide show. Press OK to display thumbnails, folders, albums. ■ (page www.kodak.com/go/easysharecenter 5). The label and icon (page (page Changing frame settings,...
– You can change the slide duration and transition style (see Viewing thumbnails There are two ways to view your pictures as thumbnails: To navigate through the thumbnails, press www.kodak.com/go/digitalframesupport Doing more with your frame Press , select a picture source (see ■...
2 Press 3 Press to highlight Copy, then press OK. 4 Press to highlight the source you want to copy to, then press OK. The picture is copied. To copy multiple pictures, www.kodak.com/go/easysharecenter to highlight a picture; see page...
2 Continue selecting pictures. A check mark appears on the selected pictures. Press again to remove a check mark. www.kodak.com/go/digitalframesupport Doing more with your frame 1 Select a picture to delete: In thumbnails view, press or, display a picture in single view.
Page 12
Unselect all 1 To remove all check marks, press Select / Unselect all and press OK. 2 Highlight Unselect all and press OK. A confirmation screen appears, then your picture display reappears. All check marks are removed. www.kodak.com/go/easysharecenter , highlight...
Upgrade firmware This option is only displayed if the upgrade file (.img) is available on the frame (memory card, flash drive, etc.). www.kodak.com/go/digitalframesupport 1 Press Home 2 Press to highlight Settings 3 Press to select a setting. Follow the screen directions.
Upgrading your firmware Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads. Follow the screen directions to download the frame firmware and install it on your frame. IMPORTANT: Do not turn off the frame during the upgrade! Options Slide duration—specify how long each picture is displayed in a...
Changing the frame orientation Your frame is set up to display pictures in landscape orientation portrait www.kodak.com/go/digitalframesupport Change the stand position: 1 Remove the stand, turn it 90 page Change the setting: 1 Press Home , Settings 2 Press to select Viewing options, then press OK.
Frame freezes up. ■ ■ PIctures are not clear. www.kodak.com/go/digitalframesupport Press the power button on the remote control or on the frame (page Make sure the power cable is securely connected Make sure you are using the power cable that was included with your frame.
Error writing to a file. File Copy Failed! Internal error. Parameter is invalid. Unknown error. www.kodak.com/go/digitalframesupport Troubleshooting and support Try one or more of the following The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected.
Page 18
Remove write protection, unlock card. ■ If card is full, delete pictures from card. The frame was unable to copy the picture. ■ Insert a different card or device the picture location setting www.kodak.com/go/easysharecenter (page 5), or change (page (page 5), or change (page...
Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. Kodak EasyShare S510 digital picture frame Color display 14.2 cm (5.6 in.) diagonal analog LCD, 320 x 234 pixels, 4:3 aspect ratio, 11.4 x 8.5 cm (4.5 x 3.4 in.) viewable area...
If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. ■ The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak/go/accessories. ■...
LCD screens. Do not allow chemicals, such as suntan lotion, to contact painted surfaces. ■ Service agreements are available in some countries. Contact a dealer of Kodak products for more information. ■ For digital frame disposal or recycling information, contact your local authorities. In the US, visit the...
Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid.
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
(2) cet appareil doit supporter les interférences reçues, y compris celles susceptibles de nuire à son bon fonctionnement. Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 25
Appendix China RoHS www.kodak.com/go/digitalframesupport...