Placing Originals On The Product; Placing Originals On The Scanner Glass - Epson XP-4200 User Manual

Hide thumbs Also See for XP-4200:
Table of Contents

Advertisement

Placing Originals on the Product

Follow the instructions here to place your original documents or photos on the product.
Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid
damaging it.

Placing Originals on the Scanner Glass

Placing Originals on the Scanner Glass
You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or
A4 (8.3 × 11.7 inches [210 × 297 mm]).
1. Open the document cover.
Note: If there is any dust or dirt on the scanner glass, the scanning range may expand to include it,
so the image of the original may be displaced or reduced. Remove any dust and dirt on the scanner
glass before scanning.
2. Do one of the following to place your originals:
• Single sheet: Place your original facedown on the scanner glass with the top facing into the
corner. Slide the original to the edges of the indicated corner.
60

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp-4205C11ck65202C11ck65201

Table of Contents