Advanced Chipset Features Setup Menu - Abit AB-NV7-133R User Manual

3-12 Chapter 3
using another operating system, select Non-OS2. The default setting is Non-OS2.
Report No FDD For WIN 95:
®
When using Windows 95 without a floppy drive set this item to Yes. Otherwise, set it to No. The default
setting is No.
Delay IDE Initial:
This item is used to support some old models or special types of hard disks or CD-ROMs. They may need
a longer amount of time to initialize and prepare for activation. Since the BIOS may not detect those
kinds of devices during system booting. You can adjust the value to fit such devices. Larger values will
give more delay time to the device. The minimum number you can enter is 0, the maximum number you
can enter is 15. The default setting is 0.
Small Logo(EPA) Show:
Two options are available: Disabled or Enabled. The default setting is Disabled. If you set to Enabled,
when computer reboot then you can see the EPA logo on the up right corner of the screen.

3-4. Advanced Chipset Features Setup Menu

The Chipset Features Setup Menu is used to modify the contents of the buffers in the chipset on the
motherboard. Since the parameters of the buffers are closely related to hardware, if the setup is not correct
or is false, the motherboard will become unstable or you will not be able to boot up. If you don't know the
hardware very well, use default values (i.e. use the "Load Fail-Safe Defaults" or "Load Optimized
Defaults" option).
Figure 3-5. Advanced Chipset Features Setup Screen
NV7-133R