Table of Contents
Advertisement
Introducing the BIOS
to use the CCMOS jumper to erase the parameters of the original CPU and to enter BIOS
Setup to set up CPU parameters again.
After setting up the parameters and leaving the BIOS SETUP, and having verified that the system can
be booted, do not press the Reset button or turn off the power supply. Otherwise the BIOS will not
read correctly, the parameters will fail and you must enter SOFT MENU
parameters all over again.
CPU VCore Voltage:
Two options are available: Std. Vcore ( Raising. The default setting is Std. Vcore. You can changes the
CPU Vcore voltage here. If you choose the Raising, the CPU Vcore voltage will raising about 3% higher
than the standard CPU Vcore voltage. This settings is for some compatibility issue, if you do not have any
issue for that, please keep the default setting.
3-2. Standard CMOS Features Setup Menu
This contains the basic configuration parameters of the BIOS. These parameters include date, hour, VGA
card, floppy disk and HDD settings.
Date (mm:dd:yy):
You can set the date in this item: month (mm), date (dd) and year (yy).
Attention
Figure 3-3A. Standard CMOS Setup Screen Shot
™
II again to set up the
User's Manual
3-5
Advertisement
Table of Contents
