To Cancel The Fine Adjustment Of The Temperature; Door Alarm And Eco Alarm Function; Quick Freezing/Quick Cooling; Lock - Hitachi R-WB560P9H Instruction Manual

Table of Contents

Advertisement

Other Functions (Continuation)
2

To cancel the fine adjustment of the temperature.

Touch " Temp. Control " button for 5 seconds until "PiPi!" sound is heard and you can set temperature by normal step (5 steps)
PiPi!
3
Door Alarm and ECO Alarm Function(Only Refrigerator Compartment)
If the door is left open for more than 1 minute, the alarm system
will inform the user by the sound and digital display.
● Door Alarm: Informs by PeepPeepPeep sound.
● Eco Alarm Display: Indicates the door opening state on the control panel.
To Disactivate Alarm and Sound
1. Keep touching "Select"
for 5 seconds until
"Peep!" sound is heared.
● Factory setting, the alarm and sound are set "ON"
NOTICE
● If the Door Alarm, Eco Alarm Display and each button operation sound have been deactivated, The refrigerator will still set
(There must set more than 45 seconds before unplug the power or power failure. otherwise the temperature display shown as before setting.)
4

Quick Freezing/Quick Cooling

Quick Freezing :
Quick Cooling :
1
Touch "First time"
for Start Quick Freezing
operation, lamp light is on.
After 2 hours (approx.) Quick freezing
operation will be finished, lamp light is off.
3
Touch "Third time"
for start two function operation,
lamp both light is on.
NOTICE
● During "Quick Freezing", priority cooling of the freezer compartment will be done, Thus, try to avoid unnesessary opening
● During defrost period,"Quick Freezing" and "Quick cooling" operation will stop even though the lamp is on. After finishing
● Please note "Quick Freezing" and "Quick cooling" mode will be released after power cut off or unplug.
5

Lock

You can prevent mischief of all the buttons on the control panel caused by children.
1
Touch "Lock"
Peep!
for 5 seconds
("Lock" light is on)
6
Touch " Temp. Control "
for 5 seconds until 1 "PiPi!"
sound is heard.
There is not sound when
touching any button
(deactive door alarm sound).
the alarm and sound to "OFF" even though a power failure or when unplugging and reconnecting the power plug.
When you want to freeze food or make ice quickly, use this function
When you want to cool food or drinks quickly, use this function
Quick Cooling
Quick Freezing
Pi!
Quick Cooling
Quick Freezing
Pi!
and closing the doors not to have a temperature rise of the refrigerator compartment.
defrost period, the operation will restart automatically.
Lock Hold 5"
Energy Saving
NOTICE
This function is subjected to change according model type.
Factory setting, the adjustment temperatrure by normal step (5 steps).
After 1 minute
After 2 minute
After 3 minute
1. Keep touching "Select"
for 5 seconds until "PiPi!" sound
is heared.
2
Touch "Second time"
for Start Quick Cooling
operation, lamp light is on.
After 90 minutes (approx.) Quick cooling
operation will be finished, lamp light is off.
4
Touch "Fourth time"
for stop two function operation
lamp both light is off.
2
To stop this function, touch
Peep!
1,2,..5 Seconds
"Lock" for 5 seconds again
("Lock" light is off)
Peep!
PeepPeepPeep
PeepPeepPeepPeepPeep
Peep continuously
To re-activate Alarm and Sound
There is sound when touching
any button
(active door alarm sound).
Before start Quick Cooling
Quick Cooling
Quick Freezing
Put food on the quick cooling
"Quick cooling" corner is
located on the upper part of
the refrigerator compartment.
Pi!
Quick Cooling
Quick Freezing
"Quick Cooling" is more
effective if food is place near
the back wall of the
refrigerator compartment.
Pi Pi!
Lock Hold 5"
Energy Saving
1,2,..5 Seconds
Pi Pi!
All LED on display-
are Flashing

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

R-wb490p9h

Table of Contents