Removing The System Board - Dell Inspiron 600m Service Manual

Back to Contents Page
System Board
Dell™ Inspiron™ 600m Service Manual

Removing the System Board

CAUTION:
NOTICE:
as the back panel) on the computer.
The system board's BIOS chip contains the Service Tag sequence, which is also visible on a barcode label on the bottom of the computer. The replacement kit
for the system board includes a CD that provides a utility for transferring the Service Tag sequence to the replacement system board.
NOTICE:
NOTICE:
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. Remove the
5. Remove the
6. Remove the microprocessor.
7. Remove the
8. Remove the one M2.5 x 8-mm screw and one M2.5 x 4-mm screw labeled "circle B."
1 M2.5 x 4-mm screw
2 M2.5 x 8-mm screw
3 system board
Great user manuals database on
Before performing the following procedures, read the safety instructions in your Owner's Manual.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
"Preparing to Work Inside the
display assembly.
palm rest.
microprocessor thermal-cooling assembly.
reserve battery cover.
UserManuals.info
Computer."