Bosch Professional GRG 18V-16 C Original Instructions Manual page 17

Only use the coin cells listed in this operating manual.
u
Do not use any other coin cells or other forms of electrical
power supply.
Do not attempt to recharge the coin cell and do not
u
short circuit the coin cell. The coin cell may leak, ex-
plode, catch fire and cause personal injury.
Remove and dispose of drained coin cell correctly.
u
Drained coin cell may leak and damage the product or
cause personal injury.
Do not overheat the coin cell or throw it into fire. The
u
coin cell may leak, explode, catch fire and cause personal
injury.
Do not damage the coin cell and take the coin cell
u
apart. The coin cell may leak, explode, catch fire and
cause personal injury.
Do not allow damaged coin cells to come into contact
u
with water. Leaking lithium may mix with water to create
hydrogen, which could cause a fire, an explosion, or per-
sonal injury.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Tool data logging is enabled in this tool.
Wireless connectivity tool with built-in
®
Bluetooth technology
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for placing blind rivets.
With the built-in Bluetooth® Low Energy Module, power tool
data and settings are transferred between the power tool
and a mobile device by means of Bluetooth® wireless techno-
logy.
Bosch Power Tools
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Nosepiece
(2) Cover sleeve
(3) Hanging ring
(4) Nosepiece magazine
(5) Mandrel container (for broken-off rivet mandrels)
(6) Handle (insulated gripping surface)
(7) Belt clip
a)
(8) Rechargeable battery
(9) Wrench
a)
(10) Battery release button
(11) User interface
(12) On/off switch
(13) LED worklight
(14) Indicator: Jaw cleaning reminder (user interface)
(15) Indicator: Jaw checking reminder (user interface)
(16) Power tool status indicator (user interface)
(17) Working modes indicator (user interface)
(18) AUTO button to select the working mode (user inter-
face)
(19) RESET button to reset the reminder (user interface)
b)
(20) Blind rivet
(21) Jaw sleeve
(22) Spanner flat
(23) Jaws
(24) Pressure spring
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Commercially available (not included in the scope of deliv-
ery)
Technical Data
Cordless rivet gun
Article number
Stroke
Pulling force
Weight according to EPTA-
A)
Procedure 01:2014
Permitted ambient temperat-
ure
– during charging
– during operation and dur-
ing storage
Recommended rechargeable
batteries
English | 17
GRG 18V-16 C
3 601 JK5 ...
mm 25
N 16,000
kg 2.0 to 3.0
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
1 609 92A 7R1 | (22.06.2022)