Dell Inspiron 1501 Service Manual page 7

Back to Contents Page
ExpressCard/Hard-Drive Bay Assembly
Dell™ Inspiron™ 1501 Service Manual
Removing the ExpressCard/Hard-Drive Bay Assembly
Replacing the ExpressCard/Hard-Drive Bay Assembly
CAUTION:
NOTICE:
as the back panel) on the computer.
NOTICE:
computer.
Removing the ExpressCard/Hard-Drive Bay Assembly
1. Follow the instructions in
2. Remove the hard drive (see
3. Remove the optical drive (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the palm rest (see
8. Remove the six M2.5x 5-mm screws from the ExpressCard/hard-drive bay assembly.
1 M2.5 x 5-mm screws (6)
9. Remove the assembly from the system board.
Replacing the ExpressCard/Hard-Drive Bay Assembly
1. At a 45-degree angle, insert the end of the ExpressCard/hard-drive bay assembly into its access hole on the side of the computer base.
2. Lower the assembly aligning the screw holes on the assembly with the holes on the system board.
3. Replace the six M2.5x 5-mm screws from the assembly.
Great user manuals database on
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Hard Drive).
Removing an Optical
Removing the Hinge
Removing the Keyboard).
Removing the Display
Removing the Palm Rest).
2 ExpressCard/hard-drive bay assembly
UserManuals.info
Before Working Inside Your
Drive).
Cover).
Assembly).
Computer) before working inside the