Removing The Battery Latch Assembly - Dell Inspiron 1501 Service Manual

Back to Contents Page
Battery Latch Assembly
Dell™ Inspiron™ 1501 Service Manual
Removing the Battery Latch Assembly
Replacing the Battery Latch Assembly
CAUTION:
NOTICE:
as the back panel) on the computer.
NOTICE:
computer.
Removing the Battery Latch Assembly
1. Follow the instructions in
2. Remove the hard drive (see
3. Remove the hinge cover (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Remove the palm rest (see
7. Remove the processor thermal-cooling assembly (see
8. Remove the system board (see
9. Remove the M2 x 2.7-mm screw from the battery latch assembly.
When you remove the M2 x 2.7-mm screw, the battery latch release on the bottom of the computer will also be removed.
1 M2 x 2.7-mm screw
10. Remove the spring from the hook on the computer base by lifting it away with a screwdriver or a plastic scribe.
Great user manuals database on
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Hard Drive).
Removing the Hinge
Removing the Keyboard).
Removing the Display
Removing the Palm Rest).
Removing the System
2 battery latch assembly
UserManuals.info
Before Working Inside Your
Cover).
Assembly).
Removing the Processor Thermal-Cooling
Board).
Computer) before working inside the
Assembly).