Getting Ready To Clean - Bissell SPOTCLEAN 2513 Series Manual

Getting Ready to Clean

Tools vary by model. To shop all tools and accessories, visit BISSELL.ca/parts.
Before You Clean
1. Vacuum to remove loose dirt from area to be cleaned.
2. Spray any BISSELL® stain pretreat formula to soiled areas or stains.
3. Allow to sit for at least 3 minutes.
4. Clean following instructions below.
Choose Your Desired Tool
Tools vary by model.
3" and 4" Tools
Great for carpet stains,
furniture and other hard-
to-reach surfaces.
3-in-1 Stair Tool
Made for tricky areas like
curves, corners and tread
of carpeted stairs.
Attaching the Tool
1.
Release the hose by twisting
the Quick Release Cord Wrap.
Unwind cord and plug into
outlet.
6" Tool
Great for cleaning stairs
and larger furniture areas.
HydroRinse™ Self-Cleaning
Hose Tool
Use to clean out your hose
after each use.
2.
Release the Flex Hose from
the Hose Grip Bracket. Unwrap
completely from around the
machine.
Deep Stain Tool
Deep injection technology
cleans the carpet from the
bottom up to quickly and
thoroughly remove stains.
Stain Trapper Tool
Messes are collected
and stored in a separate,
removable container, keeping
pet and other liquid messes
out of your machine.
3.
Choose your tool and snap
on the end of the hose.
Crevice Tool
Best for narrow spaces
and crevices that are hard
to reach.
BISSELL.ca 5