Siemens SIMATIC S7-1500 Manual page 32

Hide thumbs Also See for SIMATIC S7-1500:

Table of Contents

PROFINET interface X1 with 2-port switch (X1 P1 R and X1 P2 R)

The assignment corresponds to the Ethernet standard for an RJ45 plug.

• When autonegotiation is deactivated, the RJ45 socket is allocated as a switch (MDI-X).

• When autonegotiation is activated, autocrossing is in effect and the RJ45 socket is

allocated either as data terminal equipment (MDI) or a switch (MDI-X).

Figure 3-1

Note

You need a screwdriver (max. blade width 2.5 mm) to remove the PROFINET plug.

Remove display

You can find a description of how to remove and replace the display in the S7-1500,

ET 200MP (http://support.automation.siemens.com/WW/view/en/59191792) system manual.

Reference

You can find additional information on the topics of "Connecting the CPU" and

"Accessories/spare parts" in the S7-1500, ET 200MP

(http://support.automation.siemens.com/WW/view/en/59191792) system manual.

CPU 1511-1 PN (6ES7511-1AK02-0AB0)

Equipment Manual, 05/2021, A5E40869673-AB

PROFINET ports

Connecting up

Table of Contents