ABB M4M 30 User Manual page 58

58 M4M 30 NETWORK ANALYZER USER MANUAL
Timers menu
In this menu it is possible to configure the count-down timer, used for maintenance notification, and the
timers reset.
For the data reading of timers values please refer to chapter "8.9.Timers".
Menu
Count-down timer
Timers reset
If countdown timer menu is chosen, the screen above will appear, allowing to manually enter the value in the
format days: hours: minutes.
Energy conversion menu
In this menu it is possible to configure the conversion factors in order to associate the consumption of
active energy to the local currency or to CO2.
For the data reading of converted values please refer to
Menu
Currency/kWh
CO2/kWh
→
→ Other settings → Timers
Description
Used for the count of the system operating time.
Reset of the count-down timer.
→ →
Other settings
Description
Currency conversion factor that allows to display the equivalent of
active 3-phase energy in local currency. Factor has to be defined as
currency/kWh.
CO conversion factor that allows to display the equivalent of active
2
3-phase energy in CO
chapter
→
Energy conversion
. Factor has to be defined as kg CO
2
"8.2.Energy".
/kWh.
2